Outlet priceThe first 1 is $1,312.51 inc GST each, then $1,485.00 inc GST. Buy as many as you need.See all Outlet stock
Artfusion Graphix eLift Workstation in white with the main top tilted, a side shelf with control panel and two drawers on a steel frame
Graphix eLift Workstation in a studio room with a mermaid illustration on the tilted top and paint jars on the side shelf
Graphix eLift infographic showing the control panel with digital display, up and down buttons and 3 presets, the pencil ledge and drawers
Labelled Graphix eLift diagram pointing out corner protectors, two lift mechanisms, side shelf, control panel, drawers and floor levellers
Graphix eLift control panel diagram labelling up and down buttons, digital interface and memory presets 1 to 3, with the table at two heights
Close-up of the Graphix eLift control panel under the side shelf showing up and down arrows, a 075 display and preset buttons
Close-up of a grey corner protector and the pencil ledge on the edge of the white Graphix eLift drafting top
Graphix eLift Workstation raised to a higher position with the main top tilted and the drawers under the side shelf
Graphix eLift drawers pulled open on metal runners beneath the side shelf, with the control panel above
Graphix eLift dimension diagram in inches marking overall width, top and shelf size, drawer size, height range and adjustable angle
Artfusion Graphix E-Lift Workstation Drafting Table
Artfusion Graphix eLift Workstation in white with the main top tilted, a side shelf with control panel and two drawers on a steel frame
Graphix eLift Workstation in a studio room with a mermaid illustration on the tilted top and paint jars on the side shelf
Graphix eLift infographic showing the control panel with digital display, up and down buttons and 3 presets, the pencil ledge and drawers
Labelled Graphix eLift diagram pointing out corner protectors, two lift mechanisms, side shelf, control panel, drawers and floor levellers
Graphix eLift control panel diagram labelling up and down buttons, digital interface and memory presets 1 to 3, with the table at two heights
Close-up of the Graphix eLift control panel under the side shelf showing up and down arrows, a 075 display and preset buttons
Close-up of a grey corner protector and the pencil ledge on the edge of the white Graphix eLift drafting top
Graphix eLift Workstation raised to a higher position with the main top tilted and the drawers under the side shelf
Graphix eLift drawers pulled open on metal runners beneath the side shelf, with the control panel above
Graphix eLift dimension diagram in inches marking overall width, top and shelf size, drawer size, height range and adjustable angle
Artfusion Graphix E-Lift Workstation Drafting Table
Artfusion Graphix eLift Workstation in white with the main top tilted, a side shelf with control panel and two drawers on a steel frame
Graphix eLift Workstation in a studio room with a mermaid illustration on the tilted top and paint jars on the side shelf
Graphix eLift infographic showing the control panel with digital display, up and down buttons and 3 presets, the pencil ledge and drawers
Labelled Graphix eLift diagram pointing out corner protectors, two lift mechanisms, side shelf, control panel, drawers and floor levellers
Graphix eLift control panel diagram labelling up and down buttons, digital interface and memory presets 1 to 3, with the table at two heights
Close-up of the Graphix eLift control panel under the side shelf showing up and down arrows, a 075 display and preset buttons
Close-up of a grey corner protector and the pencil ledge on the edge of the white Graphix eLift drafting top
Graphix eLift Workstation raised to a higher position with the main top tilted and the drawers under the side shelf
Graphix eLift drawers pulled open on metal runners beneath the side shelf, with the control panel above
Graphix eLift dimension diagram in inches marking overall width, top and shelf size, drawer size, height range and adjustable angle
Artfusion Graphix E-Lift Workstation Drafting Table
Art Fusion

Artfusion Graphix E-Lift Workstation Drafting Table

$1,312.51
$1,312.51
Normally $1,485.00
Or 4 payments of $371.25 with
Add items to a quote for bulk pricing, approvals, or purchase orders.

SKU: JA0172490

UPC: 9311960170667

MPN: 0172490

Electronic Lift and a Tilting Top for Drafting and Design Work

The Artfusion Graphix eLift Workstation, Jasco code 0172490, is an electronic lift drafting table with a 100cm by 76cm angle adjustable top, a fixed side shelf, two drawers and a pencil ledge.

Height is set from a front digital control panel with up and down buttons and three presets that store favourite positions, across a range of 750mm to 1180mm. Two lift mechanisms carry the top, which tilts from 0 to 30 degrees for drawing, drafting or reading plans. The fixed side shelf measures 45cm by 76cm and sits beside the main top.

Jasco lists heavy-gauge steel construction, corner protectors and four wide floor levellers. The pencil ledge runs 100cm and includes storage, and the two drawers measure 21cm by 40cm by 5cm. Jasco's published weight limits are 22kg on the top, 11kg on the side shelf and 2kg for the drawers.

Jasco gives overall dimensions of 147cm wide by 79cm deep by 75cm high, supplied in two boxes. Pair it with geometry and technical drawing tools, drawing pencils, a desk lamp or the wider Art Fusion range.

Often ordered together

  • Electronic lift run from a front digital panel with up, down and 3 preset buttons
  • Height adjustable from 750mm to 1180mm, carried by two lift mechanisms
  • Angle adjustable main top from 0 to 30 degrees, 100cm W x 76cm D
  • Fixed side shelf of 45cm W x 76cm D plus two storage drawers
  • 100cm pencil ledge with storage
  • Heavy-gauge steel construction with corner protectors and four wide floor levellers
  • Technical drawing and drafting in design studios
  • Illustration and artwork on an angled surface
  • Reviewing and marking up architectural plans
  • Shared workspaces where users save preferred heights to the presets
  • Design and art classrooms

Shipping

Shipping is kept simple with flat rates for selected areas and free shipping where applicable. Large, bulky, rural or out-of-area orders may require additional freight, and our team will contact you if this applies. For a more specific estimate, simply add this product to a quote or visit our shipping page.

Delivery Times

Melbourne, Sydney, Brisbane, Adelaide — 1 to 3 business days
Perth — 1 to 5 business days
Regional & Outer Areas — 3 to 7 business days

Returns

If you have questions about returns, please contact us or visit our returns page for full details.

Specifications

Brand: Artfusion

Manufacturer Code: 0172490

Supplier: Jasco Pty Ltd

Lift: Electronic, two lift mechanisms

Controls: Front digital panel with up, down and 3 preset buttons

Height Range: 750mm to 1180mm

Top Angle: 0 to 30 degrees

Main Worksurface: 100cm W x 76cm D

Side Shelf: 45cm W x 76cm D, fixed

Drawers: Two, 21cm W x 40cm D x 5cm H

Pencil Ledge: 100cm with storage

Weight Limits: Top 22kg, side shelf 11kg, drawers 2kg

Overall Dimensions: 147cm W x 79cm D x 75cm H

Cable Length: 2.2m

Assembly: Approx. 30 minutes, supplied in 2 boxes

Primary Distribution Centre

Factory 5, 12 Greenway Drive
Tweed Heads South NSW 2486

ABN 18 634 002 609

Get directionsContact us

FAQs

An electronic lift raises and lowers the table from a front digital control panel. The panel has up and down buttons plus three preset buttons for saving favourite positions. Jasco lists a cable length of 2.2m.
Jasco lists an adjustable angle from 0 to 30 degrees for the main top. The side shelf is fixed.
Jasco publishes weight limits of 22kg on the top, 11kg on the side shelf and 2kg for the drawers.
Yes. Jasco gives an approximate assembly time of 30 minutes, and the table is supplied in two boxes.
Jasco lists overall dimensions of 147cm wide by 79cm deep by 75cm high. The main worksurface is 100cm by 76cm and the side shelf is 45cm by 76cm.

Shipping & Delivery

Delivery time depends on your location, the size of your order, and the shipping option selected at checkout. For in-stock items, standard metro delivery in QLD, NSW and VIC is usually 1 to 7 business days. South Australia, Tasmania, Western Australia and the Northern Territory are generally 3 to 12 business days. Express delivery for eligible parcels under 3kg is usually 1 to 4 business days in QLD, NSW, ACT and VIC. Delivery estimates apply to in-stock items only and may vary due to carrier conditions or delays.

If you need to make a change to your order, please contact our team as soon as possible. Once an order has been processed or dispatched, changes may no longer be possible. You can contact us through our Contact Us page for assistance.

Mega Office Supplies ships orders Australia wide and occasionally internationally. The best avenue would be to contact us so we can customise a specific quote for you. Please note that associated international duties, taxes and levies will be the responsibility of the customer.

Returns, Refunds & Replacements

Mega Office Supplies accepts change-of-mind returns for unopened and unused products within 14 days from the invoice date, provided the item is returned in its original packaging and in resalable condition. Original shipping costs are not refundable, return shipping is the customer’s responsibility, and a restocking fee may apply depending on the product type and supplier. Some items, including electronics, assembled or installed furniture, food, beverages, medicines, custom-made products, and certain bulk or special-order items, are not eligible for return unless required under Australian Consumer Law.

If your order arrives faulty, damaged, or incorrect, please contact Mega Office Supplies as soon as possible. Where required under Australian Consumer Law, a repair, replacement, or refund will be offered. In these cases, Mega Office Supplies will cover reasonable return shipping costs, and photographic evidence may be requested to help process the claim. Items should be reported within a reasonable timeframe after delivery.